Wooden Handle Wrench Plywood And Sheetrock Panel Holder
975 in stock
The clamping plate is not necessarily very difficult. The clamping system is designed to clamp the panel simultaneously using the pressure at the top, bottom and side!
Clamping plates are definitely a challenge. Especially when we try to use daily pipe clamps or strip clamps. While these types of fixtures work quite well on some glue projects, one thing they don't do at all is to apply pressure from the top and bottom of the panel during the gluing process. In fact, with all the pressure applied to both sides, the rods and clamps will almost certainly bend, fasten or frame your panel glue project.
Let the shelf panel glue become a thing of the past! The uniquely designed 4-way pressure solves this ancient problem by applying pressure to all four sides of the panel bond. By simply rotating the grip of the gripper, all four sides of the grip will be pulled inward at the same time. This provides the same pressure for your panel and prevents bending, bending or folding panels.
Turn the handle clockwise to tighten the clip and turn the handle counterclockwise to relieve pressure. 4-way pressure clamps are equipped with side pressure pads to prevent damage to your inventory.
You can confidently stick wide boards, shelves, desktops, etc. To set the clip, glue the glue to your item, attach the clip to the panel and turn the handle to tighten the clips on the four sides.
Material: nylon material + iron
- No ratings found yet!
There are no reviews yet.